Altec Lansing AB8500 - Manual (Page 4)

Center of Gravity
A: 9.4 inches (23.9 cm)
B: 17.0 inches (43.2 cm)
24.0 inches 20.4 inches
34.0 inches
(86.4 cm)
ARCHITECT'S AND ENGINEER'S SPECIFICATIONS
The loudspeaker shall be a low-frequency, bass
reflex design, consisting of dual long-throw, high effi­
ciency 15 inch (38.1 cm) woofer front mounted in a
7.4 ft‘^ (209.5 L) enclosure. The loudspeaker shall
meet the following design criteria: Power handling,
800 Watts of pink noise with 6 dB crest factor, band
width limited from 50 Hz to 500 Hz. Frequency re­
sponse, smooth and uniformly usable at high output
levels from 46 Hz to 3,500 Hz. Pressure sensitivity,
101 dB SPL at one watt, 100 Hz to 800 Hz, mea­
sured at a distance of one meter on axis. Impedance
4.0 ohms nominal, 3.8 ohms minimum. Directivity
pattern 110° horizontal by 50° vertical at 500 Hz.
The enclosure shall be constructed from hardwood
composite material and damped with sound absorb­
ing glass wool. The enclosure can be finished using
commonly available paints and stains to match any
decorative environment. The enclosure and cloth
grille shall be finished in beige. The dimensions shall
be 34.0 inches (86.4 cm) high by 24.0 inches
(61.0 cm) wide by 20.4 inches (51.8 cm) deep. The
loudspeaker system shall weigh 108.0 lbs (49.0 kg).
The low frequency loudspeaker system shall be
the Altec Lansing AcoustaBASS series AB8500.
a MARK IV company
P.O. BOX 26105 • OKLAHOMA CITY, OK 73126-0105 • U.S.A.
Phone: 405/324-5311 or FAX: 405/324-8981
© 1994 ALTEC LANSING CORPORATION
PRINTED IN U.S.A. 3/94 Revision 2 42-07-038250 531548