Ing ice oubes – Avanti DELUXE FROST FREE FF-97R User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
L!
ing Ice Oubes
TWIST ÍCE MAKER
Making Ice Cubes
1
Remove the ice cube tray by pulling it towards you.
2
Fill the tray with water up to the maximum water level marked on
the rear of the tray.
3
Slide the tray back into the holder, taking care not to spill the
water.
4
Wait until the ice cubes are formed.
Freezing time:
It is recommended that you wait for about one hour
with the temperature set to QUICK FREEZING for
the ice cubes to form.
Removing, the ice Cubes
1
Make sure that the ice cube storage bin is in place under the ice
cube tray. If not, slide it into place.
2
Twist one of the levers firmly in the clockwise direction until the
tray twists slightly.
Result: The ice cubes fail into the storage bin.
3
Repeat Step 2 for the other half of the tray, if necessary.
4
Remove the storage bin by;
♦
Lifting it slightly
♦
Pulling it towards you