Architect's and engineers specifications – Altec Lansing PS-92 User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ARCHITECT'S AND ENGINEERS SPECIFICATIONS

The loudspeaker system shall be a two-way

multipurpose type consisting of a 12-inch
duplex® loudspeaker with a wide-dispersion

dome radiator tweeter. The dividing network is
a dual-section type 12 db/octave slope on both
L.F. and H.F. sections with a crossover center
frequency of 1.5 kHz. The loudspeaker system
shall meet the following performance criteria:
Power handing, 125 watts of pink noise with 6 dB
crest factor, band limited from 50 Hz - 15 kHz.
Frequency response, smooth and uniformly usable
from 50 № -15 kHz. Pressure sensiMty, 97 dB spl

when measured at one meter on axis with one watt
of band-limited pink noise from 50 Hz - 15 kHz.
Minimum impedance, 5.2 ohms.

The enclosure shall be of the ported type, con

structed of 3/4 inch Enviro-board™ lined with
sound-absorbent glass wool. The enclosure shall

be covered in a protective gray carpet and feature
a metal grille. The dimensions shall be 18.8 inches
(47.6 cm) high by 22.0 inches (55.9 cm) wide by

13.8 inches (34.9 cm) deep. The loudspeaker shall

weigh 43.0 lbs. (19.5 kg) The loudspeaker system
shall be the Altec Lansing PS-92.

a MARK IV company

P.O. BOX 26105 • OKLAHOMA CITY, OK 73126-0105 • U.S.A.

Phone: 405/324-5311 or FAX: 405/324-8981

PRINTED IN U.S.A. 3/93

42-02-038828 42-07-038828