Adcom S.A.F.E GFA-7707 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
introduction
Congratulations on your decision to purchase the GFA-7705/07 multi-channel power amplifier. The GFA-7705/
07 integrates very well with any other home theater system, such as Dolby ProLogic™ or Dolby Digital™. You
have made a wise choice that vdll reward you with exceptionally accurate and musical sound reproduction for
years to come. To realize the full potential of your new amplifier, please read these operating and installation
instructions thoroughly before attempting to make any connections to it.
ADCOM Protection Plan (NORTH AMERICA ONLY)
ADCOM offers the enclosed valuable Limited Warranty. Please read the details on the Warranty Card carefully
to understand the extent of the protection offered by the Warranty, its reasonable limitations, and what you
should do in order to obtain its benefits. Be sure to verify that the serial number printed on the rear panel
matches the serial number on the outer carton. If any number is altered or missing, you should notify us
immediately in order to ensure that you have received a genuine ADCOM product which has not been opened,
mishandled, or tampered with in any way. Always retain your original sales receipt as a proof of purchase.
Description of Unit
The GFA-7705/07 is a
20-Amp
Device.
The GFA-7705/07 is high-power, high-current, wide-bandwidth design employing ADCOM’s Fast Analog Transform
(F.A.T.) circuitry with direct-coupled Power Rig output stages. All channels are completely monaural from
transformer secondaries through the output stages.
In order for this product to achieve its actual rated power output on all channels and to avoid repeatedly
throwing/popping the related electrical service panel circuit breaker, it is critical that the amplifier be
professionally installed on a 20-Amp household AC circuit and outlet, preferably dedicated but at minimum one
not shared with other large current-draw appliances or devices.
Common 15-Amp household circuits are easily and inexpensively converted to 20 Amp configuration by any high-
voltage licensed electrician.
For this reason, the GFA-7705/07 ships Factory-equipped vrith a hard wired, 20-Amp Plug on the AC Power Cord.
WARNING: DO NOT DEFEAT THE 20-AMP PLUG OR HARDWIRED AC POWER CORD TO EAAPLOY EITHER A 15 AMP
OUTLET OR “AUDIOPHILE” TYPE DETACHABLE POWER CORD.
DOING SO WILL VOID PRODUCT WARRANTY. MAY DAAAAGE THE PRODUCT AND PLACE THE USER AT EXTREME RISKOF
INJURY OR DEATH.