Arcam Alpha 7-8 - Manual (Page 6)

Section D - Alpha 8 Tuner only
Using the Remote Control
The buttons shown in white have
the same functions as those on the
front of the tuner.
Don’t forget to fit the 2 AAA batteries supplied
and ensure they are inserted correctly into the
back of the Remote Control handset before
using it.
The Remote Control handset sends a message to
an infra- red receiver which is located behind the
ARCAM badge on the front of the tuner
Do not place anything In front of the badge or
the Remote Control may not work.
; CD FUNCTIONS
i These buttons are CD player functions.
; Refer to your CD Player handbook for a full description
i of their use.This Remote Control will control the basic
; functions of Arcam CD players (except the Alpha One).
J AMPLIFIER FUNCTIONS
J These buttons are Amplifier functions,
j Refer to your Amplifier handbook for a full description
, of their use.This Remote Control will control the
i volume control and input selector (where appropriate) of
! all remote controllable Arcam amplifiers.
I CD
DISP
►1
B B
REPEAT •»Kk-
m
SHUFFLE SCAN PROG
NOTE
If you have an Alpha 7 tuner it can be
converted to the remote controllable Alpha
8 version with a dealer installable upgrade
kit.
VOLUME + -
Adjusts the volume level on Arcam remote
controllable arhftlifiers.
Please note:The VOLUME' control and
‘MUTE’buttons have no effect on the
output level of the Alpha CD players or
tuners.
TO RETRIEVE STORED STATIONS
These buttons enable you to scroll through
the stored radio station selections/presets
one at a time. When you press * , the
preset changes instantly When you press T ,
it takes a little longer This is because the
unit counts up through the presets and then
stops at the one before the preset you
were originally on.
MODE
This button selects MONO or STEREO
Please contact your dealer/distributor or
Arcam for more information.