Troubleshooting, Reset button – Aiwa CDC-XI User Manual

Page 17

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TROUBLESHOOTING

In the following cases, the corresponding error code indicator is displayed.

Error code

Cause

Solution

E-2, E-3, E-6, E-8

The disc is not inserted or ejected

properly.

Press RESET and insert the disc

again.

E-4, E-5, E-7

The disc cannot be read properly.

The disc may be damaged or

dirty. Insert another disc.

E-9

The ambient temperature is too

high.

Allow the unit to cool off (by

moving the car out of direct

sunlight, etc.).

»■

Reset button

RESET

The reset button (RESET) is located on the front side of the unit behind the control panel (see

“DETACHING THE CONTROL PANEL” on page 4).

If the unit does not operate properly, press RESET with a pointed object such as a pencii, etc. to reset

it. Note that the memory contents are erased when pressing RESET.