beautypg.com

Cabletron Systems 9E428-12 User Manual

Page 14

background image

9E428-12/36 and 9E429-12/36 Module Specific Information

12

MULTICASTS

Displays the number of multicasts received.

LINK STATUS

Indicates whether there is a physical connection from this port to another 10Base-
FL device. One of the following values appears:

Link - There is a 10Base-FL link signal present; there is a valid physical
connection from this port to another 10Base-FL device.

No Link - There is no 10Base-FL link signal present; there is no valid physical
connection from this port to another 10Base-FL device.

N/A

PORT TYPE

Displays one of the following values:

MMF ST

SMF ST

PORT STATUS

Indicates whether the port has been turned on or off administratively. You will see
one of the following values:

ENABLED - The port is turned on administratively.

DISABLED - The port is turned off administratively.

APPLICATION

Displays BRIDGING, indicating that the port is operating as a bridge with a high-
speed backbone connection.

OPERATION MODE

Displays one of the following values:

STANDARD ENET - The port can either transmit data or receive data, but not
both at the same time. Therefore, the port is running at 10 Mbps.

FULL DUPLEX - The port can transmit and receive data at the same time.
Therefore, the port is running at 20 Mbps.

Enable or disable ports from the Bridge Configuration screen.

NOTE

This manual is related to the following products: