Cobra Electronics HH 38 WX ST - Manual (Page 10)

Push key until “beep” is heard.
The DW icon will stay on.
Push and hold key until “beep” is heard.
The DW icon will flash and the FUNCTION icon
will disappear.
Dual Watch
Dual Watch allows simultaneous monitoring of
two preselected channels. To monitor Channel 11
and 17 for incoming transmissions:
Set Desired Squelch Setting (DSS).
Select Channel 11 with CHANNEL UP/
DOWN key.
Push and release FUNCTION key.
FUNCTION icon will be displayed.
PWR SAVE WX WX
SCAN DW
FUNC
9
SIGNAL
The HH 38 WX ST display will switch between
the selected channels.
To stop dual watch, push CHANNEL UP/
DOWN key on the HH 38 WX ST.
Operation Operation
13
Note
At a later time you can recall
your preset DW channels by
pushing and releasing the
FUNCTION key and quickly
pushing and releasing the
DW key.
12
Dual Watch Select Channel 17 with CHANNEL
UP/DOWN key.
flashing
icon
Scan
Func
CH9/19
Lock
CB/WX
DW Pwr Saver
PUSH &
HOLD
PWR SAVE WX WX
SCAN
FUNC
DW
DW
Scan
Func
CH9/19
Lock
CB/WX
DW Pwr Saver
PUSH
PWR SAVE WX
SCAN DW
FUNC
SIGNAL
1
2
3
4
Note
To set Desired Squelch Setting
(DSS) see Setting Squelch on
pages 4 and 5.
Note
When a transmission is received
the HH 38 WX ST will stop
monitoring. 10 seconds after the
DW stops, monitoring will
continue between the two
channels.
5
6
7
8
DW
Scan
Func
CH9/19
Lock
CB/WX
DW Pwr Saver
PRESS &
RELEASE
PWR SAVE WX WX
SCAN
FUNC
FUNC
FUNC
Func
Func