Arcam Delta 290 - Manual (Page 5)

TAPE 2 RECORD OUT - Connect to
your tape deck's input (RECORD).
TAPE 2 PLAY IN - Connect to your
tape deck's output (PLAY).
©
TAPE 1 RECORD OUT - Connect to
your tape deck's input (RECORD).
TAPE 1 PLAY IN - Connect to your
tape deck's output (PLAY).
A/V - Suitable for connecting an
Audio/Visual product such as a VCR,
Laserdisc player or Nicam tuner.
0 CD - For connecting your CD player or
DAC.
TUNER - For connecting your radio
tuner.
AUX - For connecting any unit with a
line level output, eg. tape deck, tuner etc.
Please note; AUX must not be used if
the phono module is fitted. When the
phono module is fitted, AUX becomes
an output carrying the equalised phono
signal at line level.
PHONO OPTION - Please note: The
phono input is a separate plug-in module
which your Arcam dealer or distributor
can supply and fit.
This module is compatible with most
high output moving coil and moving
magnet cartridges (MM) and low output
moving coil cartridges (MC).
MM or MC is selected via an internal
switch. Your cartridge type should be
specified when the module is fitted.
MM - For connecting a turntable fitted
with a high output moving coil or a
moving magnet (MM) cartridge.
MC - For connecting a turntable fitted
with a low output moving coil (MC)
cartridge.
GROUND TERMINAL - For
connecting your turntable's earth lead (if
fitted).
OPERATION
LISTEN SELECTOR - Selects the input
you wish to listen to. This function can
also be operated by remote control. (See
Remote Control Functions).
RECORD SELECTOR - Selects the
input you wish to record. This operates
independently of the LISTEN function.
VOLUME - Adjusts the volume level of
the loudspeakers and headphones.
This can also be operated by remote
control (See Remote Control functions).
MONO - Selects monaural output. In
normal use leave the switch out for stereo
output.
'
DIRECT - Bypasses bass, treble and
balance controls. This affects all inputs,
and will generally give a small
improvement in sound quality.
BASS - Rotate clockwise to boost the
bass response and anti-clockwise to cut
the bass response. For a flat response
leave in the central 'click' position.