Vom-783 operations manual – ASA Electronics VOM-783 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

VOM-783 OPERATIONS MANUAL
FUNCTIONS AND OPERATION
Front of Monitor : See FIGURE 4
1. Power switch
2. Camera selection
3. Day/ Night switch
4. Contrast
5. Brightness
6. Volume
STAND- BY Monitor operates when vehicle transmission is switched into
"REVERSE" ON - monitor and system operate when ignition switch is "ON"
"CAT' used mainly for rear mounted camera or as specified by the installer.
"CA2" & "CA3" and used mainly for side or mirror mounted camera or as specified by the installer.
Pre-set brightness and contrast levels optimized for day or night operation.
Variable control of contrast. Should be adjusted if the "DAY/ NIGHT"
switch does not achieve the most desirable picture.
Variable control of brightness. Should be adjusted if the "DAY/ NIGHT"
switch does not achieve the most desirable picture.
Variable control of internal speaker volume and output audio level.
FUNCTIONS
AND
OPERATION
CONTINUED
Rear of monitor : See FIGURE 4
1. POWER CONNECTION :
(4)
(J) (T)
(3) (6) (2)
Pin No.
Description
I
Triggers (DC 12~24V)
2
Power ( DC lOV ~32V)
3
Ground
4
Trigger I ( DC 12 ~ 24У]
5
Trigger2 (DC 12V~ 24V)
6
N/C
VOM-783 5