Chicago Electric 67594 - Manual (Page 4)

Page 4 For technical questions, please call 1-800-444-3353. SKU 67594
operAtioN
read the eNtire rules For
sAFe operAtioN section at the
beginning of this manual including
all text under subheadings therein
before set up or use of this
product.
Figure 1
Low OFF High
Rocker Switch
Back of Fan
1. Set the Rocker Switch to the Off (O)
position.
Place the fan on a flat, stable surface,
2.
routing the power cord to the nearest
outlet, avoiding tripping hazards or strain
on the cord.
Plug the cord into the outlet.
3.
Press the Rocker Switch to the desired 4.
speed:
Low (I) a.
High (II) b.
When finished using the fan, turn the 5.
Rocker Switch to Off (O), unplug the unit
and store in a safe, dry location.
cAutioN: Should the Fan not start when the
unit is plugged in and turned on, or if the
motor “hums” but the fan does not rotate,
immediately turn off and unplug the
fan and have it serviced by a qualified
technician.
iNspectioN AND
MAiNteNANce
to preVeNt
serious iNjurY
FroM AcciDeNtAl operAtioN
or electric shock:
Before appliance inspection or
maintenance, make sure the
appliance’s switch is turned off,
the cord is unplugged, and the
unit has cooled completely.
to preVeNt serious iNjurY
FroM AppliANce FAilure:
Do not use damaged appliances.
if abnormal noise or vibration
occurs, have the problem
corrected before further use.
BeFore eAch use, 1. inspect the
condition of the Fan. Check for loose
screws, misalignment or binding of
moving parts, the condition of the electric
wire and its plug, and any other condition
that may affect its safe operation.
To facilitate flow of air, clean the fan
2.
blade and grills regularly. To do so:
Turn off and unplug the fan. Remove a.
the five screws from the back of the grill
and gently pry the grills apart.
Wash the front grill in mild detergent
b.
and warm water, then wipe dry with a
clean cloth.
Wipe dirt from the blades, rear grill and
c.
electrical cord.
Re-assemble in reverse order. Allow to
d.
dry completely before reconnecting to
power source.
When not in use, store in a safe, dry 3.
location, out of reach of children.
This item is pre-lubricated at the factory.
4.
No additional lubrication is required.