Arcam Alpha 10 - Manual (Page 9)

Technical specification
Supply voltage: 1 15v or 230v AC RDI (Radio Data Interference) output
Power consumption: 30W operational Format: Optical (TOSLINK)
5W standby Modulation: Bi-phase (IEC-958)
Analogue audio output
RF input
Level: 2.4V RMS @ OdB FS
Tuning range: I74-240MHZ (Band III)
Output impedance: <100 n
1452-1492MHz (L-band)
Minimum load: >600 n
Aerial
Bandwidth (+/-0.5dB): 20Hz - 20kHz
Impedance: 50 n nominal in operational
frequency range
Headphone output
Connector: BNC
Level: variable up to > 1 OOmW
max into 32
Decoding
Output impedance: 1 10 ii nominal
Maximum audio data rate: 256kbit/s MPEG layer II
Load impedance: 8- 600 n
Maximum number of
Connector: 6.35mm (0.25 inch) stereo jack
stored services: 128
socket
Dimensions W/D/H mm 430x310x100
Weight 5.2 kg nett/ 7,0 kg packed
Digital audio output
Supplied accessories mains lead
Format: SPDIF coaxial & optical (TOSLINK)
Remote control inc 2 x AAA
Sample rate: 48kHz
batteries
Output impedance
Simple indoor aerial
(coaxial): 75 fi unbalanced
(Wire Dipole)
E&OE