Arcam Delta 280 - Manual (Page 2)

Technical specification
FM tuning range
Tuning system
Frequency step
Presets
Sensitivity (HF)
Alternate channel selectivity
AM suppression ratio
Capture ratio
Signal Strength meter
sensitivity
Frequency response
Ultimate S/N ratio (CCIR) Mono
Stereo
87.5 to 108.0MHz
Phase-locked-loop
50kHz
20
typically 1.4uV
better than 60dB
better than 50dB
typically 1.5dB
4 segment LED
typically 2uV to 2mV
20Hz-12kHz +/-0.5dB
typically -2dB at 15kHz
better than 75dB
better than 72dB
Total harmonic distortion 96MHz reference, 22.5kHz deviation at IkHz
Mono better than 0.10%
Stereo better than 0.30% (using MPX filter)
Chatmel separation (IkHz)
Pilot tone suppression
Output impedance
Minimum recommended load
Output level
Power consumption
Size W/D/H mm.
Weight
Supphed accessories
better than 40dB
better than 50dB
25ohm
Ikohm
850mV at 75kHz deviation
12VA
430 X 230 X 84
2.2kg nett.
3.2kg packed.
FM dipole aerial
co-ax plug adaptor
mains lead
CR25 Handi-Remote control
F-Type aerial adaptor
E & O E.