Avanti HUM2000 - Manual (Page 8)

1. Remove the iower end of the nozzle hose from the cleaner by
grasping the hose at the base and puliing out.
2 The attached hose extends to make cleaning easier in every
direction.
3 Remove the telescoping wand from its storage position located
on the back of the vacuum. A second wand is located inside the
other wand. Pull them apart and insert the opposite end inside
the other
A Attach one end of the extended wand to the nozzle hose and the other end to one of the
accessories.
> CHANGING THE DUST BAG
Always operate the vacuum cleaner with a genuine Home Maker type P8U20 dust bag installed,
Home Maker dust bags may be ordered through any authorized Avanti dealer.
1. Pull outward on the dust cover grip located on the bottom front of the dust cover and remove
the cover.
2. To remove the dust bag, grasp the cardboard portion of the dust bag and simple pull it out.
3 Spread out the end of the new dust bag. Be careful not to tear the bag,
4, Attach the new dust bag onto the bag holder by holding the bag collar and pushing back as
illustrated.
5, The dust bag must be completely installed inside of the dust compartment for proper
operation. The dust bag should not be caught between the lower edge of the dust cover and
the rubber gasket as indicated by the arrow in the illustration.
6, Reinsert the tab located on the end of the dust cover into the groove on the dust compartment
and press the cover into place. The dust cover must be completely and correctly installed for
proper operation.
> CHANGING THE FILTERS
A secondary filter protects the motor from dirt. Before installing a new dust bag. check the filter.