Detaching and attaching the frdnt panel, 1 press pwr to turn the unit off, Detaching and attaching the front panel – Aiwa CDC-X136 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DETACHING AND
ATTACHING THE FRDNT
PANEL
Attaching the front panel
You can detach the front panel from the unit and
carry it with you when you leave your car
unattended.
When you carry the front panel out of your car,
use the supplied carrying case.
Before detaching the front panel, remove the disc
to prevent possible damage to the unit.
1
Press PWR to turn the unit off.
2
While supporting the front panei with
one hand, press it to reiease one side
of the panei. Care must be taken not to
drop the panei. it may suddeniy eject at
this point.
3
When the front panel is iifted from the
unit, remove it by puliing away from the
unit.
Do NOT touch the connector on the reverse
side of the front panel, as doing so may
contaminate the connector and cause a poor
connection resulting in a malfunction.
Security Lamp
When the front panel is detached, you can find an
LED lamp on the front side of the unit. This lamp
is designed to deter theft, and continues to flash
when the front panel is detached. This unit is not
equipped with any other security systems such
as a security alarm, so there are limitations to its
effectiveness.
t::................................................................................................................................
1
F
1 °
0
®
-'i'-
E
LED lamp
ENGLISH
4