Avanti 445YW-1 - Manual (Page 9)

the opposite side.
Insert lower hinge (4) previously saved to the lower left side of the door. Before placing
this hinge, reverse the direction of the bolt-pin (6).
Set the door in place making sure the pin enters the bushing at the uncovered hole on the
upper frame of the door.
While holding the door in the closed position, secure the lower left hinge by tightening all
the screws, making sure the door is leveled with the counter top.
FIGURE 1 (Position prior to door reversal) FIGURE 2 (Position after door reversal)
1 Upper pin,
2 Pin cap
3 Inner plug
4 Lower Door Hinge
5 Washer
6 Bolt-pin
7 Leveling legs
8 Door Hinge Screws
Cleaning Your Refrigerator
• Turn the temperature control to "0", unplug the refrigerator, and remove the food, shelves,
and trays.
• Wash the inside surfaces with a warm water and baking soda solution. The solution should be
about 2 tablespoons of baking soda to a quart of water.
• Wash the shelves and trays with a mild detergent solution.
• The outside of the refrigerator should be cleaned with mild detergent and warm water.
• Wring excess water out of the sponge or cloth when cleaning area of the controls, or any
electrical parts.
• Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry
with a clean soft cloth.
MAINTENANCE OF YOUR REFRIGERATOR
8