Instructions to users, Instructions for installation, Instructions for operation – Amcor AWS240HR User Manual
Page 3: User's manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
[Instructions to users]
USER'S MANUAL >
Split Wall-Mounted Air Conditioner
Please read the "Instruction Manual" carefully prior to the use of your air conditioner so as to ensure proper operations.
Instructions for Installation
# Make sure to have the professional after-sale service persons of our company or the authorized dealers to
Install the units before you use.
1. The units are not to be Installed at places where
there might be leakage of combustible gases.
In case that the leaked gas accumulates around the units, there
might occur the accident of fire hazards.
Make sure that the earth leakage-circuit breaker
Is Installed.
n
Earth leakage-
circuit breaker
Absence of the earth leakage-circuit breaker might lead to electric
shock and some other hazards.
After the connecting of the wires between the indoor unit and the
outdoor unit, check whether the connecting is loose or not by pulling
the wire with a little force.
Make sure that the air conditioner Is property grounded.
J
The loose connecting might result in fire hazard.
o
The grounding wire on the air
conditioner should be tightly connected
to the ground of the power source.
!
Improper grounding might cause
0 electric shocks or other hazards.
Instructions for Operation
Never try to stop the operation of the air conditioner
by operate the switch.
Such performance might cause electric shocks or fire hazards.
Do not press, stretch, damage, heat or modify the
power line.
It might cause electric shocks, overheating, fire
hazards, etc. If the power line wire Is damaged or
needs to be replaced due to some other reasons,
please make sure to have dealer or the authorized
maintenance people to do the replacement.
Do not operate the switch by wet hands.
Never use the fuse with Incorrect capacity or any
other metal wires.
The use of metal or copper wires for fuse might cause operational
failures or fire hazards.