Remote control operation, Remote control – NewAir AH-320E User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4. Attach the base to the heater body by screwing
on the fastening screw.
CONTROL PANEL
OPERATING INSTRUCTIONS
Control Panel Operation
1. Place the heater on a firm, level surface and plug into
a grounded 120V 60Hz power outlet.
2. Press the ON/OFF button to turn on the heater.
POWER indicator light and HIGH indicator light
are working.
LOW: heating up to 400W
HIGH: heating up to 800W
3. Timer: The heater is equipped with a 0.5 to 4 hour
timer. To select the desired length of operation, press
the TIMER button repeatedly. Add up the lit indicator
lights for the total number of hours. The heater will
automatically shut off after the set time has elapsed.
Note:
0.5H: 30 minutes
IH: 1 hour
2H: 2 hours
4H: 4 hours
5. Swing: Press the OSCIL button and the heater head will
oscillate 90° from right to left. The indicator light will
turn on. Press the OSCIL button again to stop
oscillation. The indicator light will turn off
Remote Control Operation
The remote control can be used to perform all the operations
that can be performed from the control panel.
REMOTE CONTROL
Height Adjustment: Press in the height adjustment button and simultaneously pull the
sliding column up to the desired height. Release the height adjustment button to set. To