Aiphone PS-1225UL - Manual

PS-1225 MANUAL E PM 0303®
® Al PHON E
r" DC POWER SUPPLY FOR INTERCOM
Models;
PS-1225
^ without AC plug
PS-1225UL
^ ULJCSA Listed
PS-1225S
This product is designed exclusively for use with Aiphone intercom Systems.
INSTALLATION MANUAL
PRECAUTIONS
Genera! prohibitions Prohibitions to dismantie the unit Q General precautions
A WARNING
(Negligence could result in death or serious injury.)
• Do not connect the unit with any non-specified power source. Fire or electric shock could result. ®
• Do not connect any terminal on the unit to AC power lines. ®
• Keep AC cord away from being marred or crushed. Fire or electric shock could result.®
• Do not plug or unplug with wet hands. Electric shock could result.0
• Do not make the wires or DC output terminals shorted. Fire or unit trouble could result.0
• Do not dismantle or alter the unit. Fire or electric shock could result. 0
• Keep AC plug away from moisture or dust. Fire could result.O
A CAUTION (Negligence could result in injury or damage to property.)
• Do not install or make any wire terminations while power supply is plugged in. It can cause
electrical shock or damage to the unit. ®
• Before plugging in the unit, make sure the wires are not crossed or shorted, it can cause fire
or electric shock. M
• Do not install the unit in any of the foilowing locations, as it may cause the system to malfunction; 0
■ High or extreme cold temperature areas: under direct sunlight, near equipment that varies in
temperature, in front of air-conditioner, inside a refrigerated area, etc.
■ Places subject to moisture or humidity extremes, such as bathroom, cellar, greenhouse,etc.
• Places subject to environmental conditions, such as dust, oil, chemicals, salt, etc.
• Places subject to constant vibration or impact.
• Places subject to steam or smoke.(near heating equipment or cooking surfaces)
• Places subject to direct rain or outdoors.
Package contents
• Power supply (PS-1225,
PS-1225UL or PS-1225S)
• AC cord & plug (except PS-1225)
• Mounting bracket
• Packet of screws
• INSTALLATION MANUAL
A IMPORTANT:
in case your System and/or
Power Supply malfunctions or is
in apparent troubie,unplug the
Power Supply from AC outlet.
AC cord inlet
T t
Protection cover
Grounding terminal
DC output terminals
Type of plug varies by model
AC cord requirements (for PS-1225)
> Rating: 125V, 2A (for use with 100-125V AC)
250V, 2A (for use with 200-240V AC)
• Cord length: min. 1.8m (S'), max. 2m (67").
•Type: Must comply with requirements set out by the Safety Approval/Certification Organization In each country of use.
• AC cord iniet: Specified EN60320 or equivalent.
• Employ a plug in shape and ratings matched with AC outlet tb be used.
Plug configuration
UL LISTED
UL LISTED
Usage
North American
North American
AC cord
Nominal voltage
& current rating
120V, 60Hz,
2A min.
240V, 60Hz,
2A min.
Plug configuration Usage
AC cord
Nominal voltage
& current rating
Universal
European
230V, 50Hz,
2A min.
United Kingdom
■i..
230V, 50Hz,
2A min.
Australian 240V, 50Hz,
2A min.
-1 -