Creda TCR2 - Manual (Page 4)

To open the door The features
Press and release the front
panel in position shown
Dryer Description
3
Water container
Air intake
grille
Rating plate
Door catch
Filter
Door latch
Model &
Serial
numbers
Condenser cover handle
(Pull to open)
Condenser cover
Control panel
Drying Guide
TIMER
Knob
START
Button
Indicator Empty Water
Light
The Empty Water indicator light signals that the water
container is full and must be emptied. The light will
take a few seconds to go out after replacing the
empty water container, the dryer must be running for
this to happen.
The TIMER knob sets a drying time.
Rotate it clockwise, never counter-clockwise , until
the indicator is pointing to the drying time you want to
select (
see Start and Programmes ).
The START button begins drying a selected
programme ( see Start and Programmes ).
The HEAT button selects drying temperature ( see
Start and Programmes ).
OUT: HIGH heat.
IN: LOW (Gentle) heat.
The Drying Guide allows you to consult a user
friendly table of fabric types and load capacities.
HEAT
Button
GB