Inset a – Char-Broil CB600X 10201597-50 User Manual
Page 13

ASSEMBLY
2
1
10201597-50 • 13
Inset A
•
Carefully remove the door from the unit by swinging it opening and lifting it up and away from the smoker
chamber. Lay the door aside.
•
Place the Smoker Chamber on it’s back with the door opening facing up. CAUTION: This unit is heavy!
Place Unit on it’s back
(door opening facing up)
Swing Door open,
then lift up and
Remove the door
from its hinges
CAUTION: THIS UNIT IS HEAVY!
DO NOT ASSEMBLE WITHOUT A HELPER!
TOP
•
Install Burner Housing to Smoker Chamber using three 1/4-20x1/2” bolts. Install all bolts hand tight, then tighten with a
#2 phillips screwdriver. (not provided)
•
NOTE: The venturi tube MUST face up (towards the door opening).
Qty: 3
#1/4-20x1/2"
Combo Truss
head screw
Burner Housing
with Burner
Venturi
Tube
#1/4-20x1/2"
NOTE:
The venturi tube
MUST be installed
as shown