Perimeter watch mode, Special alert, Command – ADT Security Services 4112 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Perimeter Watch Mode

O I have this feature.

C!) I do not have this feature.

COMMAND

is used to monitor the perimeter of your building

when the system is disarmed. This is called the Perimeter Watch
Mode. In this mode, the Command Center emits a short beep
tone to alert you of entry or exit through the perimeter of your
building. No alarms are generated by this mode except 24-hour
alarms (e.g.: fire, panic, duress, etc.). There is no tone for
interior movement.

Application

This command is useful in a residential system when you want to
monitor entrances or exits in your home.

In commercial installations, the Perimeter Watch Mode can be
used as a door chime to alert you when a customer or delivery

person has entered your business.

COMMAND

To use COMMAND

1. Ensure that your security system is disarmed.

bar. The Command Mode

2. Press the COMMAND

indicator light comes on.

3. Press the ||| key. The system is now in Perimeter Watch

Mode.

4. To exit the Perimeter Watch Mode, press the COMMAND

bar, and then the ||| key.

Special Alert

O I have this feature,

d I do not have this feature.

This command is a manually operated and initiated alarm
command. COMMAND 7 can be programmed to respond to a
choice of numerous situations that may need immediate attention.
This command may also be used to send a silent alarm to the
Central Station without sounding an alarm signal on the
premises. Check with your alarm company for the options they
offer.

COMMAND

To engage COMMAND 7:

1. Press the I COMMAND I bar. The Command Mode

indicator light comes on.

2. Press the

3. This COMMAND is used for the purpose of:

□

My system will create an audible alarm when using this
COMMAND.

d My system will not create an audible alarm when using this

COMMAND.