Altec Lansing 601-8D - Manual (Page 2)

SPECIFICATIONS
Type:
Power Rating:
Frequency Response:
Pressure Sensitivity:
Impedance:
Nominal Free-Air LF
Cone Resonance:
Distribution Pattern:
Voice Coils —
LF:
HF:
Magnets-
LF:
HF:
Duplex coaxial loudspeaker
system with dividing network
40 watts of continuous pink
noise (20-20,000 Hz)
30 to 20,000 Hz in
appropriate enclosure
99 dB SPL at 4' measured on
axis with 1 watt input of pink
noise band-limited from 500
to 3000 Hz with speaker
mounted in 614D enclosure
8 ohms
39 Hz
40°Vx90°H
3" diameter, edge-wound
aluminum ribbon
diameter, edge-wound
aluminum ribbon
Alnico, 1.8 pounds,
10,400 gauss flux density
Alnico, 0.188 pound,
10,000 gauss flux density
ARCHITECT'S AND ENGINEER'S SPECIFICATIONS
The loudspeaker system shall be a two-way coaxial,
with a separate magnet structure for each section and
a dual full-section dividing network. The HF section
shall have an aluminum diaphragm and shall be
loaded with an exponentially expanded multicellular
horn. The loudspeaker system shall meet the follow­
ing criteria. Power rating, 40 watts of continuous
pink noise band-limited from 20-20,000 Hz. Fre­
quency response, 30-20,000 Hz. Pressure sensitivity,
99 dB SPL at 4' when measured on axis in enclosure
with 1 watt input of pink noise band-limited from
500-3000 Hz. Impedance, 8 ohms. Nominal free-air
Frame:
Dividing Network
(furnished):
Dimensions:
Finish:
Mounting Data —
Baffle Opening:
Mounting Bolt
Centers:
Recommended
Enclosure:
Shipping Weight:
Actual Weight:
Structurally reinforced
die-cast aluminum
Dual full section with 3000
Hz crossover frequency, 12
dB/octave slope and
continuously variable HF
shelving control with 10 dB
range
12ys" (30.8 cm) diameter
(14.3 cm) deep
Gray enamel
11 >/8" (28.3 cm)
(front or rear mount)
8 or 4 bolts equally spaced
on 11%" (29.4 cm) diameter
circle
ALTEC 614D Speaker Cabinet
18 pounds (8.2 kg)
15 pounds (6.8 kg)
(includes dividing network)
LF cone resonance, 39 Hz. Distribution pattern,
40°V X 90°H. Crossover frequency, 3000 Hz with
12 dB/octave slope. Voice coils; 3" diameter of edge-
wound aluminum ribbon (LF),
3 / 4 " diameter of edge-
wound aluminum ribbon (HF). Magnets; Alnico, 1.8
pounds (LF), 0.188 pound (HF). Flux density, 10,400
gauss (LF), 10,000 gauss (HF). Dimensions, 12V8"
diameter x 5%" deep. Weight, 15 pounds.
The loudspeaker system shall be the ALTEC Model
601-8D.
ALITEIC
SOUND PRODUCTS DIVISION
1515 SOUTH MANCHESTER AVENUE, ANAHEIM, CALIFORNIA 92803
é
LITHO IN U.S.A. 875-5K AL-1412-12