Chicago Electric Vertical Float Sump Pump 95591-.75 HP - Manual (Page 3)

SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 PAGE 3
ELECTRICAL SAFETY
grounded tools must be plugged into a gFCI (ground Fault Circuit Interrupt- 1.
er) outlet, properly installed, and grounded in accordance with all codes and
ordinances. never remove the grounding prong or modify the plug in any
way. Do not use any adapter plugs. Check with a qualified electrician if you
are in doubt as to whether the outlet is properly grounded. If the tools should
electrically malfunction or break down, grounding provides a low resistance path to
carry electricity away from the user.
double insulated tools are equipped with a polarized plug (one blade is wider
2.
than the other). This plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install a polarized outlet. Do not change
the plug in any way. Double insulation eliminates the need for the three wire
grounded power cord and grounded power supply system.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges,
3.
and refrigerators. There is an increased risk of electric shock if your body is
grounded.
do not abuse the Power Cord.
4. never use the Power Cord to carry the Sump
Pump or pull the Plug from an outlet. Keep the Power Cord away from heat,
oil, sharp edges, or moving parts. Replace damaged Power Cords immedi-
ately. Damaged Power Cords increase the risk of electric shock.
PERSOnAL SAFETY
Stay alert. Watch what you are doing, and use common sense when operat- 1.
ing this product. Do not use the Sump Pump while tired or under the influ-
ence of drugs, alcohol, or medication. A moment of inattention while operating
this product may result in serious personal injury.
dress properly. do not wear loose clothing or jewelry. Contain long hair.
2.
Keep your hair, clothing, and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
Use safety equipment. Wear AnSI-approved safety impact goggles when
3.
assembling this product. Non-skid safety shoes must be used for appropriate
conditions.
TOOL USE And CARE
disconnect the Power Cord Plug from the power source before making any 1.
adjustments, changing accessories, or storing the Sump Pump. Such pre-
ventive safety measures reduce the risk of starting the unit accidentally.