Audiovox ACA 240 - Manual (Page 3)

Warnings
This product is intended to assist in safe driving and to allow the driver to
have a broader rear view while the vehicle is in reverse. You, as the driver,
are solely responsible for the safe operation of your vehicle and the safety
of your passengers according to your local traffic regulations. Do not use
any features of this system to the extent it distracts you from safe driving.
Your first priority while driving should always be the safe operation of
your vehicle. Audiovox Electronics Corporation cannot accept any
responsibility whatsoever for accidents resulting from failure to observe
these preeautions or safety instructions.
1. This product utilizes high voltage. Any unauthorized modifications
or damage to the product may result in electrical shock. Handle all
components
with care. Inspect regularly for damage to
components and cabling.
2. You are responsible for ensuring that the installation of this
product does not void or affect the vehicle manufacturer’s
warranty. Audiovox Electronics Corporation or its subsidiaries are
not liable in full or in part for improper installation resulting in
loss or damage to your property, or for voiding all or part of the
vehicle manufacturer’s warranty.
3. Do not apply excessive force to any of the components
contained within this kit. Excessive force used before,
during or after installation that results in a damaged or non­
functional part will void all warranties.
4. Please follow the procedures in this installation manual.
Improper installation or modification of this product will
void all warranties.
Many jurisdictions have laws and regulations relating to the use of
cameras and some do not allow for the obstruction of information
contained on a license plate. Before using this product, it is the
buyer's
responsibility to be aware of and comply with any
applicable laws and regulations that apply to license plates or may
prohibit or limit the use of cameras.
Maintenance
Though your monitor requires little care, you will still need to maintain
its condition and performance by following the guidelines below.
• Keep your system away from excessive moisture, extreme heat
or cold.
• Keep liquids away from the display.
• Occasionally clean the surface of the monitor with a soft cloth
moistened with water or glass cleaner.
Troubleshooting
Symptoms Solutions
The Monitor is not on
after the vehicle is
started and the vehicle
is in reverse 1 .Check the monitor wiring and connections
2. Check the fuse in the Cigarette lighter adapter
3. Check the power connection on the camera
at the reverse lamp
Video image is not sharp
enough
Clean the camera lens with a soft cloth.
The Monitor Stays on all
the time, or runs when the
vehicle is not in reverse. The Camera is not wired correctly. If the camera
continues to transmit while not in reverse gear,
re-check your wiring at the reverse lamp.
The monitor is very dark
or the image changes
slowly
In extreme cold or hot conditions the LCD screen
may react slowly. This is normal and will clear as
the vehicle cools or warms to a normal
temperature.
11