Rear panel connections – BBE 362SW User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Rear Panel Connections
A
I
CAUTIOWn A
^
U.i
®
lUiE
CAUraRNIA. U S A
tMOOEL 362 6W
U S.PATEIVrr
8.
AC POWER CORD:
Plugs into AC power receptacle. U.S. Model, 100-120Vac, 50/60Hz. All
other models, 200-240Vac, 50/60Hz.
9.
FUSE:
Turn cap on fuse holder counterclockwise to remove fuse. (Note: For U.S. Model,
replace with 250Vac, 1/2A Fastblow type fuse. For all other models, replace with 250Vac,
. 125A Fastblow type fuse.)
JO. UNBALANCED FULL RANGE OUTPUTS:
Each channel is equipped with a 1/4" phone jack and
an RCA jack - each sends a low impedance line level output, and can deliver up to a
-I-
16dBu into 1K Ohms.
//.
UNBALANCED INPUTS:
Each channel is equipped with a 1/4" phone jack and an RCA jack
that accepts a high impedance unbalanced line level input with an average of -lOdBu.
(Note; -)-16dBu is the maximum input before clipping.)
12. UNBALANCED SUB-WOOFER OUTPUTS:
The Sub-woofer output is equipped with a 1/4"
phone jack and an RCA jack - each sends a low impedance line level output.