Brill Razorcut Premium 38 - Manual (Page 6)

Use in accordance with purpose
Tlie appliance is only inlended for cutting lawns
and areas of grass in domestic gardens and
allotments.
Adherence to the instructions for use enclosed by
Brill-GLORIA is a precondition for the proper use
of the equipment. The instructions for use also
include the operating, care and maintenance
instructions.
We must expressly note that we do not
accept any liability under the product liability
act for any damages resulting from use for
any other purpose than the intended use,
incorrect operation or non-professional
repairs. In this case no guarantee will be
given!
The appliance is not intended for professional
purposes!
Scope of supply__________________
Checking all the parts are Included:
The box contains the following parts:
- Hand lawnmower
-1 upper section of the guide handle
-1 middle section of the guide handle
- 2 lower section of the guide handle
- Assembly parts for the guide handle in a plastic
bag
-1 thickness gauge
-1 user’s manual
Fitting the guide handle
Pictures o and O
• Insert the lower section of the guide handle (6)
through the opening of the unit as shown. The
boreholes on the lower section of the guide
handle (6) must be pushed over the handle
bolts.
Note!
The lower section of the guide handle can only
be pushed onto the handle bolts when the cut­
outs in the boreholes and the nose of the handle
bolts are over each other. Once both are over
each other, the handle will slide over the bolt and
is then secured in place
A
Do not use force!
• Repeat the process with the second lower sec­
tion of the guide handle on the opposite side.
Picture 0
• Connect the components as shown from the
botton upwards. To assemble, insert the frame
clamping screw (3) through the clamping pari
(4) and the boreholes. Push the washer over the
frame clamping screw and hand-tighten the
screw with the clamping grip (2).
Putting into operation_____________
Setting the cutting height
Pictures O and
Q
• Place the mower on a solid, flat surface. Stand
behind the mower so that you can place a foot
on the roller (12).
• Loosen both lock nuts (8).
• Using both hands, set the desired cutting
height with the adjusting handles (7).
16