Cooper Lighting 84700 User Manual
Page 14
9131
Rev. M
3.1.3.2
Electrical Wiring Cont'd
( )
5.
Connect each lighting load to the respective LOOP terminals
in the high voltage section, using the #12 AWG ring
terminals provided.
NOTE: BEFORE CONNECTING LOAD TO LOOP
TERMINALS, REMOVE JUMPER FROM ONLY THOSE
TERMINALS THAT LOAD IS BEING CONNECTED TO.
( )
6.
Make any option related connections.
( )
7.
Re-install the dead front cover and fasten securely.
3.1.4
Option -1, De-Energized Switching, Disabling
( )
1.
To disable de-energized switching feature, move E2 spring
shunt on 31955 circuit assembly from E2-2/E2-3 to E2-1/E2-
2, refer to Figure 3C.
8