Chicago Electric 10" Industrial Tile/Brick Saw 69275 - Manual (Page 9)

Page 9 For technical questions, please call 1-800-444-3353. Item 69275
SAFETY
OPERA
TION
MAINTENANCE
SETUP
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Functions
Pump Outlet
Bevel Lock
Lever
Depth Stop
Water Tray
Frame
Stand
(sold separately)
Water
Tray
Table
Power
Switch
& Key
Reset
Button
Depth
Lock
Depth
Knob
Guard
Lock
Miter
Gauge
Table
Lock
Lever
Toggle
Table Stop
Table
Stop
Drain
Plug
Blade
(sold separately)
Pump
Bracket
Power
Cord
Pump
Power
Cord
Power Switch: The Power Switch includes a Key
for safety. The Tile Saw switch cannot be turned
on without the key. Remove the Key after use.
Reset Button: Directly above the Power Switch is
the Reset Button. If the Tile Saw overheats it will shut
down automatically. Allow it to cool down, make sure
there are no loose connections or damaged cords,
and then press the Reset Button to restart the Saw.
Do not force workpieces into the saw and make sure
the blade is properly wetted to reduce overheating.
Toggle Table Stop: This allows the Table to be
removed if needed. Lift the Stop and turn it to
lock/unlock. If the slot is aligned with the Table,
the Table can be removed. If the slot is turned
sideways, the Table is locked into the saw.
Table Lock Lever: To lock the Table in place, line up this
Lever′s pin with the hole in the rail, and press the Lever
towards the rail. Pull out on the Lever to unlock the Table.