Cortelco 2740 - Manual (Page 24)

19 2740 User Manual Version 1.11
4.9 Erase All Feature Settings
To erase all the feature settings stored at a particular station and return that telephone to its original
factory settings. This will not erase any numbers from the directory or the memory dial.
a.
Press MENU
b. Press DOWN ARROW repeatedly until “Advanced Setting” appears in the display
c. Press the soft key under ENTER. “Erase Memory” will appear in the display.
d. Press DOWN ARROW until “Erase Settings” appears in the display.
e. Press the soft key under ENTER
f. Press the soft key under ERASE. After a brief pause, the display will read “Erasing
Done!”
4.10 Reset Default Settings
To reset the 2740 to factory default settings press MENU, MUTE,MUTE,2,7,4,1.
5. TELEPHONE OPERATION
5.1 Making and Answering Calls
When the handset is lifted, the 2740 will automatically select a line based on the automatic line
selection setting as described in Section 2.7. The 2740 will automatically select a ringing line if the
handset is lifted during ringing.
To use the speakerphone to make or answer a call or a page, press the SPEAKER button instead of
lifting the handset. This will select the line in the same manner as the handset described above. To
override automatic line selection, press the desired LINE button instead of pressing the SPEAKER
button. The 2740 will then be connected to that line on the speakerphone.
To switch from handset to speaker during a call, press the SPEAKER button and hang up the handset.
To switch to handset from speakerphone, lift the handset. Note that whenever the SPEAKER indicator
is on, the handset may be hung up without disconnecting the call.
5.2 Redial
5.2.1 To redial the last phone number dialed
a. Go off-hook by lifting the handset, pressing SPEAKER, pressing HEADSET, or by
pressing the desired LINE button.
b. Press REDIAL.
5.2.2 To redial any of the last five phone numbers dialed
The Redial feature enables viewing or redialing of any of the last five telephone numbers dialed. This
also shows the time, date and duration of each call.
a.
With the phone on-hook and idle, press REDIAL. The display will show the last number
dialed, the time and date of the call, and its duration.
b. Press the right arrow button under the display repeatedly to scroll through a list of the last
five numbers dialed along with the time, date, and duration.
c. Go off-hook at any time to dial the displayed number.
5.3 Hold
5.3.1 Placing a Call on Hold
To place an outside call on Hold, press HOLD. To take the call off hold, press the line button of the
line on hold. While a caller is on hold, the handset can be hung up without disconnecting the call.