Cobra Electronics CP-9135 - Manual (Page 17)

The LED on handset will flash and
handset will beep.
The and LED will light on the base.
Four beeps will emit from the base.
Begin talking.
Intercom Mode
From The Base
29
Note
To initiate INTERCOM while on
a call,push and release
button.Then push and release
button.
Proceed following INTERCOM
instructions.
Note
Only the handset can end
INTERCOMmode. Push and
release button to end.
Operation Operation
Intercom Mode From The Handset
Your CP-9135 can serve as an intercom between
the base and the handset. To utilize this feature:
Note
Intercom may be initiated from
either the handset or the base .
28
Intercom Mode
From The
Handset Intercom Mode From The Base
Push and release button. The LED
will illuminate.
1
2
3
Push and release button. The LED will
flash on the base.
1
2
Intercom
Intercom
In Use Intercom
In Use
Intercom
Page/Find
Low Batt
Intercom
Intercom
Page/Find
Hold
Intercom
CP9135 manual layout.6 10/20/98 12:41 PM Page 34