Guardzilla iPhone User Manual
Add a camera iphone, Users

Ver 1.0
www.guardzilla.com
Page 1
Guardzilla is a registered trademark of Practecol, LLC
iPhone is a registered trademark of Apple, Inc.
Add a Camera
iPhone
TM
Users
Adding a camera is a 3-step process
1. Adding the new camera
2. Configuring the new camera for your home wifi
3. Securing your camera
Device preparation
1) Unpack your additional Guardzilla and plug in the power
2) When the light on the front of your additional Guardzilla starts to blink green
a. Go to your smart phone’s WIFI Settings
b. Join the Guardzilla Wi-Fi network
i. SSID is Guardzilla-XXXX
ii. XXXX represents the last four characters of your Guardzilla’s MAC address
Step 1: Add a Camera
Launch the app
Note: Status bar will show “Camera not found” because your
phone is connected to your new camera only
Press SETTINGS