Adjust back pack harness and control handle – Poulan PPBP30-9096320642 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

4. Attach throttle linkage clips to both ends of the

flex tube to secure the throttle cable,

(Fig. 3-2D)

3-2B

THROTTLE LINKAGE CLIPS

3-2C

3-3. ATTACH INTERMEDIATE TUBE AND

CONCENTRATOR NOZZLE

Connect the intermediate tube (H) and

concentrator nozzle (1) or 56mm nozzle (J) {you

can only use one nozzle at a time). Push the
tubes together and turn clockwise until they lock

together (Fig. 3-3A}, Use concentrator nozzle

when you need more airflow in tight places; flower

beds, under decks, etc.

3-3A

3-4. ADJUST BACK PACK HARNESS AND

CONTROL HANDLE

1. Place blower on your back by slipping arms

through the shoulder straps as if you were
putting on a jacket {Figure 3-4A),

2. Adjust backpack harness and control handle.

3. Once adjustments have been made to the

straps for user comfort, remove the blower

from your back and place on level ground in
an upright position.