Assembly instructions – Poulan PPBP30 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ASSEMBLY INSTRUCTIONS

3-1. ATTACH FLEX TUBB

Put the hose damp(C) on the (lex fubo(8) before connecting
(he flex tube(B) and the fan’s outlet tube(A) together.
Connect the ilex lube (B) to the (atVs outlet tube (A) (Fig.

3-1A) with a hose ctamp (0) (Fig. 3-18) and tighten
securely (Fig, 3-18).

3-1B

3-2. ATTACH OPERATING TUBE

NOTE; keep the throttie cable as straigtit as possible when
connecting (he blower tubes.

1. Place the unit on (lat surface during assembly, insure

screw mechanism o( clamp is positioned away from

operator.

2. Put tire hose damp (C) on the (lex tube(B) and the op

erating (ube before connecting them together.

3. Turn the throttle linkage mark (D) so it aligns with the

throttle handle (F) (Fig,3-2A), insert the operating
tube (E) into the flex tube (8) (Fig. 3-2A) and then

tighten securely with a hose clamp (G) (Pig. 3-2B),

4. Attach throttle linkage clips to both ends of the flex

lube to secure the throttle cable. (Fig. 3-2D)

3-2B

riiftomt MHKftCE CUPS