MTD 21A-450 Series User Manual
Operator’s manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Operator’s Manual
Rear Tine
Tiller
21A-450 Series
IMPORTANT: Read safety rules and instructions carefully before operating equipment.
Warning:
This unit is equipped with an internai combustion engine and shouid not be used on or near any unimproved forest-
covered, brush-covered or grass-covered iand uniess the engine's exhaust system is equipped with a spark arrester meeting
appiicabie iocai or state iaws (if any), if a spark arrester is used, it shouid be maintained in effective working order by the operator,
in the State of Caiifornia the above is required by iaw (Section 4442 of the Caiifornia Pubiic Resources Code). Other states may have
simiiar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized
service dealer or contact the service department, P.O. Box 368022 Cleveland, Ohio 44136-9722.
MTD PRODUCTS INC P.O. BOX 368022 CLEVELAND, OHIO 44136-9722
PRINTED IN U.S.A.
FORM NO. 770-10137D
(
10
/
2000
)
Document Outline
- MTD PRODUCTS INC P.O. BOX 368022 CLEVELAND, OHIO 44136-9722
- TRAINING
- PREPARATION
- OPERATION
- Maintenance And Storage
- Tools Required For Assembly
- To Remove Unit From Carton
- Attaching Depth Stake Assembiy
- Attaching The Handle Assembly
- Attaching The Clutch Cable
- Attaching The Control Rod
- Checking The Clutch Adjustment
- Tire Pressure
- Before Starting
- To Stop Engine
- To Operate The Tiller
- Handle Adjustment
- Belt Tension Adjustment
- Carburetor Adjustment
- Cleaning The Tine Area
- Belt Replacement
- Tires
- MANUFACTURER’S LIMITED WARRANTY FOR: