Assembly, Instructions, Contents of hardware pack (see figure 1.) – MTD 24677L User Manual
Page 4: Loose parts in carton (see figure 2.), Assembly instructions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FIGURE 1
ASSEMBLY
INSTRUCTIONS
CONTENTS OF HARDWARE PACK
(See Figure 1.)
(1) Clutch Grip Assembly*
(1) Hair Pin Cotter*
(1) Clevis Pin*
(1) Extension Spring*
(1) Lock Nut 1/4-20 Thread*
(3) Hand Knobs
(3) Belleville Washers
(1) Heavy Flat Washer
(4) Hex Bolts 1/4-20x 1.75" Long
(4) Hex Lock Nuts 1/4-20 Thread
(2) Stud Pins
(2) Push-on Speed Nuts
(1) Hex Jam Nut 1/4-20 Thread* (Not Shown)
LOOSE PARTS IN CARTON
(See Figure 2.)
M
(1)
Bag
N
(1)
Nozzle
0
(1)
Upper Handle
P
(1)
Air Duct Assembly
Q
(1)
Clutch Rod*
R
(1)
Directional Discharge Assembly
S
(1)
Impeller Guard
*Self-Propelled Models Only.
FIGURE 2.
TOW BAR KIT - Standard with push models.Optional
(See figure 3.) with self-propelled models.
T (2) Tow Bar Halves (Not Shown)
U (2) Hex Bolts 5/16-18 X 1.00" Long
V
(4) Shoulder Spacers
W
(2) Hex Nut 5/16-18 Thread
X (1) Truss Machine Screw 1/4-20 X .75" Long
Y
(1) Lock Washer 1/4" I.D.
Z
(1) Hex Nut 1/4-20 Thread
AA (1) Shoulder Bolt
AB (2) Belleville Washers 3/8" I.D.
AC (1) Hex Jam Lock Nut 3/8-16 Thread
/
FIGURES.