Special cord set instructions, Clean before first use – Mr. Coffee TM1 Series User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SPECIAL CORD SET INSTRUCTIONS
1. A short power supply cord is provided to reduce the hazards resulting
from becoming entangled In or tripping over a longer cord.
2. An extension cord may be purchased and used If care Is exercised
in its use.
3. If an extension cord is used, the marked electrical rating of the extension
cord must be at least 10 amps and 120 volts. The resulting extended cord
must be arranged so that it will not drape over the countertop or tabletop
where it can be pulled on by children or tripped over accidentally.
• This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not modify the plug in any way.
P
recautions
W
hen
U
sing
T
his
M
achine
• Place the machine well back from the edge of the counter.
• To stop the brewing cycle before completed, grasp the molded plug
and unplug.
• Avoid areas which may become hot or emit steam when the machine
is on, particularly the steeping basket and water reservoir. The steeping
basket lid must be on while the machine is brewing.
• Unplug the unit when not in use or when wiping the exterior.
Wipe with a damp cloth only.
• TO MAINTAIN THE QUALITY OF PARTS, WE RECOMMEND HAND
WASHING ONLY.THESE ITEMS ARE NOT DISHWASHER SAFE.
• DO NOT operate the machine unless the pitcher and steeping basket
with the lid on are snug against the machine.
• DO NOT move the machine while in use or afterwards, until it has cooled.
Steam may escape from the steeping basket while the unit is cooling.
• DO NOT place a cloth or otherwise restrict airflow beneath the appliance.
• Avoid jerking or straining the power cord when unplugging.
Grasp the molded plug to unplug.
• This machine is not designed for commercial use.
• Never reheat a beverage by passing it through the brewing system.
• Do not permit children to use this machine unless under close adult
supervision.
Clean Before First Use
1. Wash the pitcher, steeping basket, steeping basket lid and pitcher lid
In mild detergent and water. Rinse each thoroughly. THESE ITEMS
ARE NOT DISH WASHER SAFE.
WARNING:To prevent injury from hot steam, do not plug the unit in
until water is in the reservoir and the pitcher is in place.
2. Fill the pitcher with water to the top water level mark on the pitcher
and pour into the water reservoir. Do not overfill.
3. Place ice cubes in the pitcher to the top of the ice level mark on the pitcher.
4. Place the steeping basket, with lid, into the pitcher, and slide under the
machine. Make sure the pitcher is pushed snug against the machine
(See Figure C).
5. Plug the cord into an electrical outlet and push the ON button to begin the
brewing cycle. The indicator light will illuminate to let you know the machine
is ON (See Figure D).
6. When the water has cycled through, the unit will shut off automatically.
The indicator light will turn OFF to let you know the cycle is complete.
7. Slide the pitcher away from the machine (See Figure E).
8. Remove steeping basket and discard the water in the pitcher.
D
iagram
of
P
arts
W
ater
R
eservoir
P
itcher
ON-OFF
I
ndicator
L
ight
V
P
ower
“ON”
B
utton
S
teeping
B
asket
S
teeping
B
asket
L
id