I m p o r t a n t, Safe operation practices for power vacuums – MTD 246-680A User Manual
Page 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I M P O R T A N T
It is suggested that this manual be read in its entirety before attempting to assemble or operate. Keep this
manual in a safe place for future reference and for ordering replacement parts.
This unit is shipped WITHOUT GASOLINE or OIL. After assembly, see operating section of this manual for
proper fuel and amount.
SAFE OPERATION PRACTICES FOR POWER VACUUMS
1.
Read the operating and service instructing manua,!
carefully.
Be
thoroughly
familiar
with
the
controls
and proper use of the power vacuum.
2.
Never allow children to operate this power vac
uum.
3.
Keep the area of operation clear or all persons,
particularly small children and pets.
4.
Check fuel before starting engine. Do not fill fuel
tank
indoors,
when
engine
is
running,
or
while
engine
is
hot.
Wipe
off
any
spilled
fuel
before
starting engine.
5. Do not change engine governor settings.
6.
Do not put hands near rotating parts for any rea
son.
7.
If the power vacuum should start io vibrate ab
normally,
stop
the
engine
and
check
immediately
for the cause. Vibration is generally a warning of
trouble.
8.
Before cleaning, repairing or inspecting make cer
tain all moving parts have come to a complete
stop.
Disconnect
spark
plug
wire
and
keep
wire
away
from
plug
to
prevent
accidental
starting.
Also keep throttle control lever in the stop posi
tion.
9.
If the power vacuum should become blocked with
debris at any point shut engine off and wait until
the impeller comes to a complete stop before at
tempting
to
remove
the
obstruction.
Disconnect
spark plug wire to prevent accidental starting.
10. Check all bolts for tightness at frequent periods.
11.
Never store this power vacuum with fuel in the
tank. Allow engine to cool before starting in any
enclosure.
12.
Keep bag and equipment free of debris when not
in use.
13.
Never operate this power vacuum unless air duct
and
vacuum
bag
are
properly
affixed
in
tfieir
place. Large zippered end of bag must be closed
when
operating
to
prevent
objects
from
being
blown out.
14. Never empty vacuum bag when engine is running.
15.
Never change inlet nozzle or auxiliary hose attach
ment when engine is running.
16.
The
manufacturer
recommends
that
the
operator
wear
safety
glasses
or
some
other
suitable
eye
protection when operating this machine.
17.
Check the vacuum bag frequently for wear and
replace when necessary.