Remove tiller from crate, Attach clutch cable (see fig. 7), Check tire pressure – Poulan 159399 User Manual
Page 7: Handle height, Assembly
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ASSEMBLY
CONNECT SHIFT ROD (See Fig. 6)
o Insert end of shift rod into hoie of shift lever indicator.
» Insert hairpin clip through hole of shift rod to secure.
REMOVE TILLER FROM CRATE
» Make sure shift lever indicator is in “N” position (See
Fig. 6)
• Tilt tiller forward by lifting handle. Separate cardboard
cover from leveling shieid.
" Rotate tiller handle to the right and pull tiller out of
carton.
ATTACH CLUTCH CABLE (See Fig. 7)
» Hook end of dutch cable through hole in control bar
bracket.
END OF
CLUTCH CABLE
CONTROL BAR
BRACKET
CONTROL BAR
BRACKET
CONTROL
CLUTCH
CABLE
F!G. 7
CHECK TIRE PRESSURE
The tires on your unit were overinfiated at the factory for
shipping purposes. Correct and equal tire pressure is
important for best tilling performance.
® Reduce tire pressure to 20 PSI (1.4 kg/cm^).
HANDLE HEIGHT
® Handle height may be adjusted to better suit operator.
{See ‘TO ADJUST HANDLE HEIGHT” in the Service
and Adjustments section of this manual).