MTD 111-150 - Manual (Page 3)

PARTS LIST FOR MOWER MODEL NOS. 111-150 and 111-180
Ref.
No.
Part No.
111-150
Part No.
111-180
DESCRIPTION
1
. . . - —
Engine
2 710-158 710-158 Hex Head Cap Screw 5/16-24 x 1-1/4” Lg. *
3 738-102 738-102 Axle Bolt
4 504-9392 505-9392 Wheel Assembly - Complete
5 736-105 736-105 Belleville Washer
6 310-10415 310-10415 Height Adjuster Complete - L.H.
7 736-119 736-119 Spring Lockwasher 5/16 Screw *t
8 712-123 712-123 Hex Nut 5/16—24 Thread *f
9 437-10909 437-10911 Deck Assembly
10 310-10414 310-10414 Height Adjuster Complete — R.H.
11 714-365 ' . 714-365 Hi Pro Key #505 *t
12 748-189 748-189 Blade Adapter t
13 312-7582 312-7581 Blade
14 736-217 736-217 Spring Lockwasher 3/8 Screw Heavy Duty *t
15 710-459 710-459 Hex Head Cap Screw 3/8-24 x 1-1/2” Lg. Heat Treated f
16 710-117 710-117 Hex Head Cap Screw 5/16—24 x 1” Lg. Heat Treated t
17 901-10769 901-10769 Blade Adapter Kit/Less Blade
18 305-7006 305-7006 Fortiflex Bearing
19 714-104 714-104 Hairpin Cotter
20 746-128 746-128 Cable Clip
21 310-7016 310-7036 Lower Handle
22 712-107 712-107 Hex Center Locknut 1/4—20 Thread *
23 710-106 710-106 Hex Head Cap Screw 1/4-20 x 1-1/4” Lg. *
24 310-9364 310-9364 Upper Handle
25 710-606 710-606 Hex Head Cap Screw 1/4—20 x 1-1/2” Lg. *
26 710-129 710-129 Round Head Self Tapping Screw #8—32 x 5/16” Lg. *
27 305-7071 305-7071 Grip
28 712-526 712-526 Speed Nut
29 710-437 710-437 Round Head Machine Screw #10—24 x 1/2” Lg.
30 310-8511 310-8511 Throttle Control — Complete
310-10029 310-10029 Throttle Control — Complete (Optional Cover)
31 710-407 710-407 Slot Hex Head Extension Screw #8—32 x 1/2” Lg.
32 437-10611 437-10611 Engine Shroud (Optional)
33 305-7470 305-7470 Throttle Control - Knob ft
34 310-8506 310-8506 Throttle Control — Bracket ft
310-9996 310-9996 Throttle Control — Bracket (Optional Cover)
35 901-7627 901-7627 Ferrule Assembly ft
36 732-141 732-141 Conduit and Wire ft
37 305-7520 305-7520 Knob — Height Adjuster **
38 310-8313 310-8313 Spring Lever **
39 736-105 736-105 Belleville Washer
40 712-116 712-116 Elastic Stop Nut **
41 310-7492 310-7492 Pivot Bar **
42 710-209 710-209 Sems Hex Head Cap Screw 3/8—16 x 5/8” Lg. **
43 310-10408 310-10408 Index Plate — R.H. **
310-10409 310-10409 Index Plate - L.H. **
44 437-7857 437-7857 Handle Panel
45 305-9973 305-9973 Control Cover (Optional)
46 305-9871 305-9871 Hub Cap (Not Shown) (Optional)
* For faster service obtain standard nuts, bolts and washers locally. If these items cannot be obtained locally, order by part
number and size as shown on the parts list.
t Part of Blade Adapter Kit/Less blade (901-10769). ** Part of Height Adjuster Complete (310-10414—R.H., 310-10415—L.H.).
ft Part of Throttle Control Complete (310-8511). (Optional 310-10029).
NOTE! This instruction manual covers various models, and all acces­
sories shown do not necessarily apply to your model mower.
If repairs or service is needed on the engine, please contact your
nearest authorized engine service outlet. Check the "Yellow Pages’’
of your telephone book under "Engines— Gasoline.’’
Find It Fait
In Th*
'Yellow Pages'
FORM NO. 77a3320C