MTD 219-100A - Manual (Page 13)

PARTS LIST FOR MODEL 219-100A
REF.
NO.
PART
NO.
COLOR
CODE
DESCRIPTION
NEW
PART
REF.
NO.
PART
NO.
COLOR
CODE
DESCRIPTION
NEW
PART
1 04258 —312 Engine Bed 38 712-0241
Hex Nut 3/8-24 Thd.*
2 04126 Inspection Plate 39 736-0169 L-Wash.3/8” Scr.*
3 710-0128 Hex F-Tapp Scr. #10-32 x .50” 40 712-0798 Hex Nut 3/8-16 Thd.*
Lg.*
41 711-0599 Clevis Pin 3/8” Dia.
4 —
Engine 42 714-0126 #9 Hi-Pro-Key 3/1 fc x W Dia.
5 710-0158 Hex Scr. 5/16-24 X1.25” Lg.* 45 04197 —463 Belt Guard
6 756-0248 Sheave 3.0” x .50 46 04691 —463 Mounting Plate Ass’y.
7 750-0284 Spacer 47 712-0107 Hex Cent. L-Nut V4-20 Thd.
8 736-0117 FI-Wash. .385” I.D. x .62 0.D. 49 716-0119 Snap Ring %” Dia. Shaft
9 04259 Engine Shaft Spacer 50 756-0249 Pulley—Double Groove 4.50”
10 736-0169 L-Wash. 3/8” Scr.* O.D.
11 710-0152 Hex Scr. 3/8-24x1.00” Lg.* 51 736-0231 FI-Wash. .344x1.125
12 742-0166 Double Tine R.H. 52 736-0119 L-Wash. 5/16” Scr.*
13 742-0165 Double Tine L.H. 53 710-0118 Hex Scr. 5/16-18 X. 75” Lg.*
14 710-0152 Hex Scr. 3/8-24 x 1.0” Lg. 54 732-0233 Spring Extension .62O.D. x
15 710-0259 Hex Sems Scr. 5/16-18 x .62” 4.94 Lg.
Lg*
60 712-0107 Hex Cent. L-Nut V4-20Thd.
17 736-0119 L-Wash.5/16” Scr.* 61 04196 Hold Down Clamp
18 712-0123 Hex Nut 5/16-24 Thd.* 62 712-0107 Hex Cent. L-Nut V4-20Thd.
24 712-0181 Hex Top L-Nut 3/8-16 Thd. * 63 756-0370 idler Bearing Ass’y.
25 710-0600 Hex Wash.-Hd. Seif Tapp. 64 736-0300 FI-Wash. .385” I.D. x .870”
Scr. 5/16-24x.50”Lg. O.D.
26 04204 Belt Pusher 65 07353 Belt Clip
27 04688 Idler Brkt. Ass’y- 66 712-0158 Hex Cent. L-Nut 5/16-18 Thd.
28 738-0183 Shoulder Scr. .500" Dia. x 67 747-0148
Lower Control Rod
.215 70 754-0196
V-Belt Vz” X 30” Lg. (Forward
31 742-0167 Outer Tine Ass’y. L.H. Belt) Fiber “B”
32 714-0145 Internal Cotter Pin 71 714-0105
Sq. Key 3/16x3/16x1.00”
33 742-0155 Inner Tine Ass’y. L.H. Lg.
34 742-0154 Inner Tine Ass'y. R.H.
72 711-0599 Clevis Pin
35 742-0168 Outer Tine Ass’y. R.H.
36 742-0106 Tine 12”—Right Hand
37 736-0169 L-Wash. 3/8” Scr.*
‘For faster service, obtain standard nuts, bolts and washers locally. If these items cannot be
obtained locally, order by part number and size as shown on parts list.
(463—Top Flite Red) When ordering parts if color or finish is important, use the appropriate color
code shown at left, (e.g Top Flite Red Finish—04624 (463))
The engine is not under warranty by the tiller manufacturer. If repairs or service is needed on the
engine, please contact your nearest authorized engine service outlet. Check the "Yellow Pages” of
your telephone book under “Engines-Gasoiine.”
Find it Fati
in The
Yellow Pages
13