Step 1, Step 2, Step 3 – SINGER 9113 User Manual
Page 31: Four-step buttonholing
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 5
FOUR-STEP BUTTONHOLING
Your machine makes buttonholes in four easy steps.
• You never need to move the fabric or
reposition the needle.
• Always make a practice buttonhole on a
sample of your fabric.
• Be sure bobbin contains enough thread.
When making buttonholes on hard-to-
reach areas convert machine bed to free
arm sewing.
Mark buttonhole position on fabric as
indicated in pattern.
When sewing delicate fabrics, place a
piece of paper over the fabric when
positioning the garment. Lower the
presser foot and slip the paper out
from under the foot. This will prevent
the teeth on the underside of the foot
from picking and pulling the fabric.
Recommended Settings
Stitch Selection;
Buttonhole Stitch
Stitch Width:
1 1 ^ ^ -------
Stitch Length;
4
Foot:
Buttonhole (L)
Needle Plate:
General Purpose (A)
Step 1
•
Raise presser foot.
• Place fabric under foot.
• Center a red guideline (1) of foot around
beginning line of buttonhole.
• Select Buttonhole Stitch #1/3.
0
A/C
• Position needle in fabric at point (2).
• Lower the foot and make sure the sliding
portion of the foot is all the way forward.
Make 4 or5 stitches ending at point (3).
• Raise needle.
Step 2
•
Select Buttonhole Stitch #2. Tj B
• Stitch down to point (4).
• Raise needle.
Step 3
•
Select Buttonhole Stitch #1/3.0 A/C
• Make four or five stitches, ending at
point (5).
• Raise needle.
29