Suggested dryer settings – Amana TGA600 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SUGGESTED DRYER SETTINGS
AUTOMATIC
regular
/
delicate
cycles
LOAD TYPE
FABRIC
SETTING
(Temperature)
CYCLE
(Timer Setting)
Heavy Cottons
Normal
MAX-DRY
Cotton Work Clothes
Cotton Knits
Normal
NORMAL
Dresses and Dress Shirts
Normal
LESS DRY
Sheer and Very Lightweight
Cottons. Items labeled "Dry
With Low Heat"
Delicate
DELICATE
AUTOMATIC PERMANENT PRESS CYCLE
Permanent Press
Polyester Knits
Heavy and Mediumweight
Synthetics
Permanent
press
AUTOMATIC
PERMANENT
PRESS
Lightweight, Délicates, Sheers
and those labeled " Dry With
Low Heat"
Delicate
AUTOMATIC
PERMANENT
PRESS
The suggested timer settings are approximate. Check garment care
labels for proper dryer setting. At first, set indicator toward center
of drying zone. You may find you will get better results for your loads
by setting the indicator to either side. Turn timer knob to a lower set
ting (clockwise) for less drying, or to a higher setting (counterclock
wise) for more drying.
The heat on the "delicate" setting is not sufficient to remove wrinkles
from permanent press.
Always use the SIGNAL with the AUTOMATIC PERMANENT PRESS
cycle. Remove load immediately upon completing cycle. This reduces
wrinkling.
Page 3