Reversing the door – Amana 40086001 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Reversing the Door

To reverse doors perform the following steps;

1. Remove four hinge attaching screws.

Remove all 9 screws from door and hinges.

Pull bottom of door liner out (A), then pull down (B), removing door liner from door panel.

Rotate door panel 180° as shown.

Remove door strike from door liner and reinstall on opposite side.

Insert liner under flange on bottom of door (A), then push top of door liner into place (B)

7. Reinstall 9 screws removed in Step 2.
8. Using a screwdriver, remove two door plugs and reinstall on opposite side of door opening.
9.

Reinstall four hinge attaching screws removed in Step 1.