About your automatic cycles – Amana LG2501 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ABOUT YOUR AUTOMATIC
CYCLES
The timer knob does not advance at an even pace in the automatic
cycles as it does in the time cycle.
For instance, you may notice the timer knob remains in the same
position for 15 minutes before it begins to move. THE TIMER IS
NOT MALFUNCTIONING. This only means it took 15 minutes for
the load to become dry enough to start advancing the timer knob.
The length of time it takes for the timer knob to begin advancing
depends on the type and size of load being dried. Depending on
the model of dryer you have, it may or may not have all the
following selections;
MAXI DRY - Use this
setting when drying
relatively full loads of
heavy cottons.
NORMAL - Use this
setting for cotton work
clothes, cotton sheets,
dresses and shirts.
DELICATE - Use this
cycle for sheer and
very lightweight cot
tons and those items
labeled "Dry With
Low Heat". Set
FABRIC selector on
"delicate" when using
the DELICATE cycle.