D cycle selector control, B start control, How to dry^a load of laundry – Sears 74291 User Manual
Page 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How to dry^a load of laundry
Clean lint screen before each load.
Set Cycle Selector Control Q.
e
Put laundry into dryer and shut
the door.
Remove load when dry.
Push the Start Control Q to start
your dryer.
D Cycle Selector Control
Use this control to select the proper drying method for the type of
items in the load. The control can be set for Timed Drying or Air.
You can turn the control at any time to make drying time longer
or shorter or you can turn the control to an OFF position to shut
the dryer off.
B Start Control
Use this control to start the dryer. Be sure the door is closed.
Opening the door stops the dryer. It will not start again until you
close the door and push the START control. Be sure the Cycle
Selector Control is on a dry setting.
OPERATING STATUS SYMBOLS
Color coordinated keys indicate in which portion of the cycle the
dryer is operating.
Part No. 3392338