Service – Sears 390.30579 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SERVICE
VERTICAL SWITCH REPLACEMENT
Models 390.30479 and 390.30579
Float
Rod
Fasten Strap
to Bottom of
Pump
A CAUTION Make sure pin bolds float rod in switch
housing; otherwise pump will not shut off.
To check switch operation, run pump through one com
plete cycle after installation.
A WARNING jgjgjj of electrical shock. Can bum or kUL
Plug pump and switch into a grounded electrical outlet
onty.
This manual is related to the following products: