Sears 279827 - Manual (Page 2)

INSTALLATION AND WIRING INSTRUCTIONS
for Pluggoble Motor Replacement
This Kit Contains:
1 Motor Assembly
2 V*" Female Terminals (insulated)
1 Sheet Instruction
Bsctrteál Shock Hibzard
Dlficonnect power before
servidAg.
.
Failure to ido so could result In
seitous toltiiy or death.
NOTE TO THE INSTALLER: This motor kit is an autbottead FSP service teplaeement
pari for your application. The motor in this kit may or may not be kt^cat to yoiir
old motor. If your current motor has the pluggable motor aaFttoh ($ee F|giao .4B}i
replace the aervice motor fn the same manner as you removed your defecfiva motor.
If your defective motor has the switch where the vrlre lead from the main harness
connects to die motor switch Indivlduatiyi carefully follow instructions below._______
3. If you choose to use Rie pulley supfdiect the
replacement motor, you may proceed to steps.
Otherwise proceed step 4.
. PotertUal Fire Hazard and/or
Nulsatiee Tripping of Motor Protector
DO NOT under any ^roumstance attempt
to remove or. replace the motor switch
from this pluggable service motor. The
switch is a non.sefvloeable component!
Failure to do so oould result In fire, serious
injury or death.
4.
5.
1. Remove defecdve motor using standard motor
removed procedures.
Remove pulley from r^lacement motor by udng.two
{2} open end or adtjusi^e wrenches. Place one on
the motor shaft, tight befiihd №e piAey, mtd the other
on the pulley. Holding the motor el^ in place with
one (1) wrench, turn pulley with olher wrench In a
counterdockwise dliwidon to remove pulley.
See
F^ureS,
Remove belt restralner from replacement motor. See
ngum2.
2 . Compare and note the difference between the
defective motor and your riew replacement motor. The
first thing you w HI need to' compare Is the motor
pulleys. 'The puRey supplied with the replacement
motor can be used In all applications. Mttiough
there are two (2) cases, you may want to use the
pulley from the defecfiva motor. $e& f^ure 1 forihese
two (2) cases.
flEHOWBELT
lER
REHOVE PULLEY
t^SFEEO
APPUCATION.
RGURE1
NOTE: ft you choose not to reuse your pulley
from the defective mgtor as shown in Rgure i,
you will loose the 2^peed or 3-speed option.
OWhgi CoipOfSWn 1W4
mm£2 (conmucii}
Inslruclior Sheel 279007 7/94