Using the washer, Prepare and sort laundry as, Add wash load to tub – Sears 95701 User Manual
Page 9: Choose control settings, Water tcmpeirature, Water level, Turn on hot and cold water faucets, Cycle selections, Use washer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Use
Washer
Remember—Select Water Temperature
and Water Level for each load
WASH TEMPERATUREE
COLD
WATER LEVEL
MEDIUM
SOAK/
PREWASH
PREWASH
HEAVY
OFF SOIL MEDIUW
LIGHT
COTTON
STURDY
■WARM
KNITS/
SOIL ^
PERM
DELICATE
PRESS
SPIN ONLY PULL-START PUSH ■ STOP ^ RINSE S SPIN
USING THE WASHER
1. Prepare and sort laundry as
directed on page 4.
2.
Measure correct amount of
laundry aids and add to empty
tub. (Refer to pages 6 and 7 for
laundry products and water
hardness information.)
3. If desired, add diluted liquid
bleach as directed in Bleach Dis
penser section on page 5. Do not
pxjur bleach directly onto wash
load.
4. Add wash load to tub.
5. Choose control settings
according to type of load and
amount of soil.
• WATER TCMPEIRATURE
Select
desired
wash/rinse
temperature cdmbination. The
washer will not fill if the knob
is pointing between 2 settings.
See page 10 for suggested
settings.
• WATER LEVEL
Select water level that is best
for size of toad washed. Water
should cover top of wash load.
6. Push cycle selector knob in
and turn right (clockwise) to
desired wash cycle and time.
For best results, follow fabric
care
labels
for
washing
instructions.
7. Turn on hot and cold water
faucets.
8. Start washer by closing lid and
pulling out timer knob. Washer
will operate with the lid open.
However, it will not go into spin
cycle unless lid is closed. To
stop washer or change cycle,
push in Cycle Selector knob and
turn it clockwise to desired
setting.
9. Add fabric softener, if desired,
to final rinse. Follow manufac
turer’s directions on product label.
(If a fabric softener dispenser is
available, follow directions on
page 5.)
10. After the last spin cycle, wait
approximately 1 to 2 minutes for
the safety lid lock to release.
Remove wash load for drying.
CYCLE SELECTIONS
COTTON
STURDY
This
cycle
provides up to 15 minutes of normal
agitation, a spray rinse in the first
spin followed by a deep rinse and 10
minutes of fast spin. Set selector
according to amount of soil in each
load.
PERM PRESS
This cycle pro
vides up to 12 minutes of normal
agitation followed by a 2 minute
cool down rinse to reduce wrinkling
in the first spin, a deep rinse and 6
minutes of fast spin.
KNITS/DELICATE
This
cycle
provides
6
minutes
of
gentle
agitation followed by a spray rinse
in the first spin, a deep rinse and 6
minutes of slow spin.
SOAK
This cycle can be used to
treat heavily soihxl or stained items
that may requii e more than one wash.
It provides 2 minutes of normal
agitation followed by 12 minutes of
soak, 2 minutes of normal agitation
and 6 minutes of fast spin. Use
recommended amounts of detergent
and bleach or soaking agent for one
wash cycle. (See package labels for
amounts.) Cold water is used in this
cycle.
NOTE:
Tlie Soak cycle should
always be followed by a wash cycle
using
recommended
amount
of
detergent.
PREWASH
The Prewash portion
of the Soak cycle can be used alone to
help remove protein-based stains such
as milk, grass and blood or to loosen
soils
before
washing.
Prev/ash
provides 2 minutes of normal agitation
followed by 6 minutes of fast spin.
Use
recommended
^mount
of
detergent for one wash cycle, ^ater
temperature will
be
the same as wash
water temperature selected.
A
caution
Using hot water in
Prewash can set stains. See Stain
Removal chart on page 7.
Page 9