Laintaining the unt screen – Sears Clothes Dryer User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 4
laintaining the Unt Screen
Laundry detergent and fabric softener
usage, over time, may cause a build
up on the lint screen. A clogged lint
screen can extend drying times. If the
lint screen becomes clogged due to a
build-up, remove it and clean using
the following method:
1. Wet both surfaces of the lint screen
and the bristles of a nylon brush with
hot water.
2. Pour a liquid detergent on the brush’s
bristles.
3. Scrub the screen with the brush until
all build-up is removed.
4. Rinse the screen with hot water.
5. Dry the screen thoroughly and
replace it in the dryer.
21